There may be some minor cosmetic issues with the stock. Such as recoil pad not being completely flush with the stock as well as the finish not covering the carbon fiber weave so it shows through. That is why it is being discounted.
This is for the Remington 700 m5 short action. It is inlet for the M24/Proof Sendero barrel contour. It is in the Strata finish
Stocky’s renowned VG2 Carbon Fiber stock is lighter and stronger than ever.
Truly the Next Generation of carbon fiber layup - they are stronger, lighter and more precisely machined than ever before. This, the newest stockmaking facility in America, took us more than a year to put together but we finally accomplished it. You can be sure our new CF lineup is formulated with the best-of-the-best American Technology, indeed the world, has to offer. We spared no expense, if we needed it we brought it in-house.
Construction
For the beautiful exterior shell we hand lay layers of premium carbon fiber cloth one-at-a-time in our own molds. We then thermodynamically activate the resins using our own proprietary, in-house designed and built computer-controlled convection ovens, controlling the heat curves to the temperatures required to achieve ideal curing / time curves for each individual model. The resulting CF shells are the lightest and strongest we have ever seen.
Once the shell is completely cured it must be filled and inlet for your rifle. While some manufacturers might be tempted to use a relatively homogeneous fill for the forend as well as the receiver area, varying the density using fillers, we had another important requirement. Rather than adding weight and reducing strength by machining a big rectangular hole (like competitors) for adding in our aluminum Accublock® after-the-fact, we wanted to develop our own lightweight material that structurally duplicated or was better than T6061 aluminum metal from a compression and strength standpoint but could be molded right in as part of the fill process. That was a tall order but our engineers accomplished it by developing a new Accublock® composite from scratch. Needless to say we cannot tell you exactly how, but if you look closely at your stock you’ll see our famous Accublock® integrated and machined right into your stock. 
Stocky's take: When I tested conventional composites using our V-style bedding they literally cracked under torque. They were not strong enough to withstand the outward pressure to the sides of the V without splitting, so I came to realize something special would be required or else we'd be making just another composite stock. That's simply not how I roll.
The some of the benefits will be obvious, for example when you torque the screws (45 in/lbs. suggested) you’ll have no squishiness. If you didn’t know better you would think it was aluminum. There will be no cracks or degradation of strength under torque and/or recoil of the heaviest calibers. There will be no flaking or deterioration over time either. Unlike aluminum it is thermally stable as well. Whether you are hunting coues deer in the desert sun at 120° or muskox from an igloo at -50°, the torque settings will not change therefore giving you a more reliable zero under any and all conditions. It is also impervious to moisture and does not shrink or expand due to climate.
Here’s what matters the most - We are so confident in the integrity of your new stock if your stocks ever breaks return it and we will replace it no charge.
Bedding
Our exclusive Carbon Accublock® design functions better than metal, requires no additional bedding. In fact you may discover it shoots the best right out of the box. However, if you or your customers require individual bedding for best practices we are formulating the ideal bedding kits using our own proprietary formula to match, or simply use your favorite compound.
Nominal Specifications
Overall Length: 32.2"
Foernd Width: 2" (at the swoop)
Length Of Pull: 13.8"
Weight: (Decel Pad): 28 oz
