Stocky's® Long Range Composite Stock (LRC™ Accublock®) - Remington 700™ - NEW Premium Finishes

The new Long Range Composite Stock is is the result of two years of research and development that was designed to accomplish several goals. First, we wanted to combine the best modern stock designs in the world into one “ultimate” model that would not only have the most inherent accuracy available, but also have the high comb needed to clear big scopes while still able to remove the bolt from the receiver. We also required the LRC™ to be durable, comfortable to shoot, easy to control and flexible enough to accommodate a wide range of barrels from hunting-weight sporters through the heaviest varminters. We accomplish this barrel interchangeability though the use of our patented forend inserts.

We've noticed some shooters prefer these stocks with no barrel channel insert installed, if you'd like yours without the channel insert (maximum free float), just give us a call.

Please do not confuse new Long Range Composite Stock with the cheap, flimsy polypropylene stocks on off-the-shelf factory composites like the 700 SPS. These are constructed from the stiffest, most durable 40% fiberglass filled composite we could find, much like your Glock frame, with our famous aluminum Accublock® molded right into the stock from the start.

A lot of time and effort went into developing the best finish for our stocks and we have finally the perfect finish. 

We are offering these stocks in a vairety of textured finish spider web colors and several hydro-dip finishes. 

Premium Hydrographics:

• Carbon Fiber Cloth
• Kryptek Highlander
• Kryptek Typhoon

Premium Textures

• Olive with Black Web
• Tan with Black Web
• Black with Gray Web

Please note: The black listed on this page is a finished smooth black. 

For these stocks we have developed a new KickSoft™ recoil pad. Our new pad is of a medium firmness, when shooting magnums it won’t collapse or make a firm shoulder hold shaky like a softer pad, nor is it as hard as some others that do little to absorb recoil. We think you’ll like it a lot, but if you want a different pad it'll unscrew and your gunsmith can fit the alternate of your choice.

The grip cap is made from the same material as the stock and forend, a special type of 40% glass-filled composite. I can see many of our more custom-minded customers having an identical cap machined out of a small piece of aluminum stock and engraved to taste.

The forend features our distinctive "Swoop™" that is not only decorative but also serves as a functional hand stop when you're pulling the butt into the shoulder for a field shot.

These stocks don’t require bedding, however those who insist on using an epoxy bedding system in their rifles should only concern themselves with skim-bedding the aluminum AccuBlock® itself. Do not remove any of the composite material in the stock itself nor modify the block in any way.

Nominal Specs: length overall - 32"; forend width - 2"; weight 3lbs 11oz

*Components:

1. Stock
2. Your choice of a patented:
   (2.2) Narrow Barrel Channel Insert (Sporter to Magnum barrels) OR
   (2.3) Wide Barrel Channel Insert (Magnum to Varmint barrels)
3. 10-32 x 5/8” Insert Screws (3)
4. Grip Cap
5. Grip Cap Screws (2)
6. Stocky’s KickSoft™ Recoil Pad
7. Recoil Pad Screws (#10 x 1” Phillips)
8. Swivel Studs
9. Swivel Stud Spacers
10. (10.1) Rear Receiver Screw (10.2) Front Receiver Screws
11. Mil Spec Floorplate Spacers

* Reference only, stocks shipped completely assembled.

US Design Patent Number D744,055