Our new TIKKA Hunter is a classically-styled Ultra Carbon hand laminated sporting riflestock. Weighing in at just 27 ounces, it is the lightest, handiest classic for the demanding Tikka rifleman. Shown in our natural carbon laminated finish, it will soon be available in your choice of our dipped and painted finishes. These should prove to be the among most accurate Tikka stocks on the market.
Stocky's Take: We fit the Tikka models very tightly to our over-the-counter rifle, there is literally no slop, so visually make sure it is bottoming in the inlet. When you first set in your barreled action into place that is probably the first thing you will notice. Because the recoil lug is seperate from the receiver, getting it seated correctly is of primary importance. With your recoil lug bottomed in the stock, you must have at least about 0.070" protruding into the receiver slot to be considered acceptable. Ideal is 0.0800" to 0.0900".
Please Note: These stocks include a precision recoil lug.
Nominal Specs:
O.A.L. 29.5”
L.O.P. 13.5”
Weight (24-27 oz)
Recoil Reduction via SVL Limbsaver pad
Unfinished Carbon - these are literally just about how they came from the mold, with any cosmetic imperfections we notice addressed by our staff. Some minor cosmetic spots may remain such as small areas of porosity, tooling marks and carbon fiber burrs. You can use these stocks as they are, touch them up or just scuff and paint, now or down the road.
Hand-crafted with 100% American-made materials in our West Palm Beach, FL facility.
- Brand:
- Stocky's
- Overall Length:
- 29.5"
- Weight:
- 27 oz
- Length of Pull:
- 13.5"
- Forend Width:
- ?
- Max Barrel Contour:
- Can Be Opened Up to 1.25" Straight Bull Barrel
- Drop of Comb:
- .674"
2 Reviews Hide Reviews Show Reviews
-
carbon fiber T3x stock
drop in fit is excellent / quality is excellent / finish is excellent / one criticism: LOP is not the same for everyone, I have a noticeable shorter LOP than average which necessitates shortening the stock, if there is an option in ordering for differing LOP's I missed it when I ordered mine, as I do with any firearm I have purchased in the past 25 years I cut the stock which takes a bit of enginuity
-
Very Impressed
Purchased the stock last year for my t3x proof build and now that I have some experience I will say this is a very lightweight and rigid stock. The best option I have found for a lightweight hunting rifle. The receiver and barrel sit very low in the inlet and there is contact between the stock and barrel, but with how ridged the stock is I haven't noticed any kind of poi shifts off of a backpack or bipod. The paint will not hold up but that doesn't matter to me. There are nicer looking fancier stocks with more features on the market, but if you are looking for the lightest most solid stock, this is it.
